Smooth Rods and Tape

The Reprap Prusa Mendel is a good design, but it does have several problems that I would not go so far as to call flaws, but are troublesome.
The first big problem with the A-frame design. The frame has to be squared and aligned just right or the x-axis can be off in relation to the y and z axis. This can make the prints lopsided and bed leveling almost impossible.
The second big problem has to do with the way the x-ends are mounted. When the x belt gets tightened it pulls the x ends together. Is the smooth rods are not tightened enough the x ends slip, this results in both the z rods binding, and the x belt becoming loose. The new push fit x ends in the v2 Prusa are supposed to help fix this, which they probably do. The problem is that the smooth rod have to be vary close to the right length and can not be longer than what is listed in the wiki. And of course the smooth rods I have are longer, and I do not want to cut them.
The solution that I have rested on is using the modified Aleph Objects Clamp X-ends by jridley (thing:16383). These work better but I still had problems with the x ends slipping. So the solution was to wrap duct tape around the rods to add some grip. So far it is working nicely, hope it lasts.